SPECIFICATIONSWarranty: --Warning: --Video Capture Resolution: OtherType: HELICOPTERState of Assembly: Ready-to-GoRemote Distance: 10kmRemote Control: YesRecommend Age: 12+yPower Source: ElectricPlugs Type: xt30Package Includes: Original BoxOrigin: Mainlan
Warranty: —
Warning: —
Video Capture Resolution: Other
Type: HELICOPTER
State of Assembly: Ready-to-Go
Remote Distance: 10km
Remote Control: Yes
Recommend Age: 12+y
Power Source: Electric
Plugs Type: xt30
Package Includes: Original Box
Origin: Mainland China
Operator Skill Level: Beginner
Motor: Brushless Motor
Model Number: Happymodel Larva X
Material: Carbon Fiber
Indoor/Outdoor Use: Indoor-Outdoor
Flight Time: —
Dimensions: —
Controller Mode: MODE2
Controller Mode: MODE1
Controller Battery: —
Control Channels: 8 Channels
Charging Voltage: —
Charging Time: —
Camera Mount Type: Fixed Camera Mount
Aerial Photography: Yes
Happymodel Larva X 100mm Crazybee F4 PRO 2-3S 2.5 Inch FPV Racing Drone BNF w/ Runcam Nano2 Camera
Notices:BecauseEmaxcantprovideAvanrushpropellersintime,
so willsend it w/HQPROPT2.5*2.5*3propellersandEMAXAvanrushpropellersrandomly.
Specification:
Brand Name: Happymodel
Model:Larva X
Item Name:100mm 2-3S 2.5 Inch FPV Racing Drone
Wheelbase: 100mm
Size: 88x88x45mm (without propellers)Weight: 50g (without battery)
Drone Version: BNF ( With Receiver & Without Battery)
| Happymodel EX1103 7000KV Motor | Mode: EX1103KV options: KV7000Configu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter: 1.5mmMotor Dimension(Dia.*Len):13.5x16mmWeight:3.7g |
| Crazybee F4 Pro V3 Flight Controller | (Frsky version)CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DXMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000 (SPI connection)Board Size: 28.5×28.5mmPower Supply: 2-4S battery input (DC 7-17V)Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 readyFrsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)No RX version need to add external ReceiverBuilt-in Betaflight OSD(SPI Control)Built-in Current meter Max 70ACurrent meter scale set to 470Built-in 5V 1A BECBuilt-in voltage detection |
| Onboard 10A 4in1 ESC | MCU upgraded to EFM8BB21Power supply: 2-4S LiPo/LiPo HV (7v/17v)Con. Current: 10A Burst Current: 12A (5S)Support BLHeliSuite programmableFactory firmware: F_H_40_REV16_5.HEXDefault protocol: DSHOT600 |
| OnboardFrsky D8 Receiver Version (Internal Frsky NON-EU receiver Version) |
SPI BUS receiverFrsky D8/D16 switchableCompatible Non EU transmitter both D8 and D16 modeChannels: 8ch or 16chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 300m |
| Internal Flysky Receiver Version | SPIBUSreceiver Protocol:AFHDSandAFHDS-2ASwitchable Channels:8ch(AFHDS)or14ch(AFHDS-2A) Nogroundinterference(Transmitterandreceiver1mfromtheground):300m Failsafesupport |
| External TBS Crossfire Receiver version | CRSF Protocol , Official TBS transmitter compatible |
| External DSMX Receiver version | Frequency range: 2.403-2.479GhzInput power: 3.3V — 5VResponse time: 22ms / 11msResolution: 1024/2048Display method: LEDOperating voltage: 3.3VWorking current: 60MASize: 18mm*13mm*5mmWeight: 0.9 gAntenna length: 30mmData format: Serial portProtocol: DSM2/DSMXDistance: no ground interference (1 m from the ground ) more than300m |
| External Frsky RXSR Receiver version | Weight: 1.5gNumber of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)Operating Voltage Range: 3.5V~10VOperating Current:70mA@5VFirmware UpgradableCompatibility: FrSky X Series modules and radios in D16 modeCould support Frsky New ACCST Protocol ( Upgrade firmware) |
| HappymodelDiamond_VTX | Output power: 25~200mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 250mA~510mA(type)Antenna: RG178 antennaU.FL interfaceFrequency: 5.8GHz 5bands 40 channelsWith RacebandSmartaudio readyWeight: 3g without antennaVideo Output Size: VGA (640×480)Video Output format: NTSCRecord video size : 1280×720 @25FPSTF Card support: Max.32GInterface: JST SH1.0 3pin for Camera JST SH1.0 5pin for Connect with F3/F4 Flight controllerCompress Format: AVI |
| Runcam NANO2 FPV Camera | Model: Nano 2Image Sensor: 1/3″ CMOSHorizontal Resolution: 700TVL Lens: 2.1mm(M8) FOV 155Signal System: NTSC / PALS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: [email protected]D-WDR: AutoDay/Night: ColorPower: DC 3-5.5VCurrent : 110mA@5V [email protected]Housing Material: ABSNet Weight: 3.2gDimensions: 14x14x16mm ( LxWxH) |
| Recommend Lipo Battery ( All Version Don’t Include) |
Recommend2S 450mAh Lipo /3S 300mAh/350mAh/ 450mAh Lipo Battery |
Features:– New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible– Powerful and smoothly– Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles– Camera Angle adjustable– VTX power switchable 25mw~200mw– Smartaudio ready , change VTX bands, powers, channels via OSD– Receiver option: Frsky D8/ Flysky / DSMX / Frsky RXSR/ TBS CRSF– Diamond VTX Ready– Compatible both for 2-3S Lipo/LIHV
Package Included:
1X Larva X frame1X Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky NON-EU RX Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX4X 1103 KV7000 motor4X Micro Avan Rush Propeller 2.5 Inch ( 4 CW & 4 CCW)1X Runcam Nano2 Camera1X 5.8G 25-200mW VTX1X Propeller disassemble tool1X ScrewdriverIf need battery,you can buy it by the link.https://www.aliexpress.com/item/1005001303038367.html
Copyright © 2025 .All Rights Reserved.Powered by www.totalrcmodels.com
Reviews
There are no reviews yet.